Features and performance
It may have landed several months later than promised, but the arrival of 4K UHD Blu-ray is perfectly timed to partner the first out-of-the-box HDR (High Dynamic Range) TVs – and the result is a marriage made in AV heaven.
Ultra HD Blu-ray is no small incremental improvement over 1080p – it ushers in a level of picture performance that hasn’t been seen in the home before. We know that 4K streaming services from Netflix and Amazon look good, but what we have here is a class apart.
The DMP-UB900 is the first Ultra-HD Blu-ray player to launch in the UK, sneaking in ahead of Samsung’s K8500. It’s better specced that its rival, and that’s reflected in the steeper £599 price point (that’s about $855 / AU$1,125 – pricing and availability for the US and Australia have yet to be announced). It’s also certified by THX as a 4K source component, another first.
Design-wise the UB900 looks much like Panasonic’s previous high-end Blu-ray player, the DMP-BDT700. Behind the translucent drawbridge fascia the disc tray sits off to the left, with a USB port and SD slot beneath the central display.
There are two HDMI outputs on the rear. One delivers sound and vision, while the other is intended for audio only. In a typical home cinema setup all source components route via an AV receiver, but for this player you’ll ideally need a receiver with HDMI 2.0a HDCP 2.2-compatible inputs.
Absent one of those you can route the Video/Audio output direct to your 4K screen, leaving the audio HDMI to route multichannel sound to the amp.
Additional connections include 7.1 analogue outputs, plus a stereo phono pair and two digital audio outs (optical and coaxial). Networking is via Ethernet or dual-band Wi-Fi. The player also supports Miracast, for smartphone mirroring.
Build quality is solid, with a nice finish, but the chassis is an unapologetic fingerprint magnet. The deck ships with a glossy IR remote.
Built for 4K entertainment
The raison d’etre of the UB900 is to play 4K HDR Blu-rays, but the deck is also backwards-compatible with standard Blu-rays (including 3D discs), DVDs and CDs.
The player reviewed here is a stock UK release, which is to say Blu-ray support is geo-locked to Region B, while DVD playback adheres to Region 2. For other regional variants the same local rules apply. The good news is that all 4K UHD Blu-rays are region-free, which means any player will play any 4K disc.
The UB900 is also an accomplished media streamer and file playback device. Network content services include Netflix and Amazon Instant Video, both of which are 4K enabled, plus BBC iPlayer, BBC News and Sport, MySpace, YouTube and DailyMotion (amongst others).
A versatile DLNA media player for USB and networked sources offers codec support for MKV, MP4, MOV and MPEG2 video files. Audio is similarly well catered for, covering DSD (both 2.8 and 5.6MHz), AAC, ALAC, FLAC, MP3, WAV and WMA.
Explore the menus and you’ll find plenty to tweak, particularly on the audio side. There’s a Dialogue Enhancer, which lifts the centre channel level, and 7.1 channel audio reformatting for 5.1 soundtracks, if you play out in PCM. For Dolby Atmos you’ll want to leave the player outputting bitstream though.
In fact, there are so many minor settings adjustments that can be made that it’s easy to get confused; when bamboozled, remember that Automatic is usually your best friend.
For all its cleverness though, the UB900 is not averse to looking daft. The screen saver is literally a box with the words ‘screen saver’ displayed inside – it’s almost as if the text was put there as a placeholder, and then forgotten about. Pretty much anything else would have been preferable.
Pristine performance
So how good is 4K Blu-ray? In a word: amazing. The detail and colour depth available is stunning. Disaster flick San Andreas proves to be a visual feast. 4K Blu-ray streams off disc at the best part of 100Mbps, compared to Netflix at 15Mbps, and has 10-bit colour with HDR grading.
I auditioned the player with Panasonic’s 65-inch DX902 Ultra-HD Premium set, and I had to scoop my jaw repeatedly from the floor.
For 2160 50/60 content an HDMI cable that supports 18Gbps is required. If your TV only supports 2160/24p you’ll be able to get away with something slower.
Optimum picture quality is display-dependant. For comparison, I used the player with a non-HDR 4K panel. While its pictures still looked terrific, image quality wasn’t quite so dramatic. An 8-bit 4K panel with SDR performance really doesn’t show the format off to its best advantage.
Indeed, a comparison between The Lego Movie in 4K SDR and its regular BD counterpart, upscaled on the same 4K screen, reveals few obvious differences. The same comparison on a bright HDR screen is (literally) night and day. Regardless of HDR, 4K disc playback needs an HDMI TV input with HDCP 2.2 support.
The deck is also a superior music player. The UB900 may not support legacy disc formats DVD-A or SACD, but it does a fabulous job of upsampling and massaging standard CDs. The deck’s 192kHz upconversion is brilliant, while a so-called Sound Effects settings menu offers up some really nice refinements. There’s a trio of audio resampling modes which lift upper frequency response, tailored to pop/rock, jazz and classical.
My favourite tweaks, though, are the Digital Tube presets, of which there are six. These emulate the characteristics of vacuum tube amplifiers, and while that might sound hokey, give them a try – I really dug Digital Sound Tube 2.
Verdict
We liked
The DMP-UB900 will restore you faith in physical media. In full 4K HDR guise it offers a level of performance that will have new 4K TV owners gasping. Ultra-HD Blu-ray brings the experience of 4K digital cinema to the home, and rewards with brilliant colour fidelity, deep contrast and almost three-dimensional clarity.
We disliked
The UB900 may be fully compatible with Blu-ray and DVD, but its lack of legacy music format support could see high-end buyers waiting for the likes of Oppo to enter the 4K Blu-ray fray. Build quality is good, but the player lacks high-end heft.
Final verdict
The 4K Ultra HD Blu-ray format sets a new benchmark in picture performance, and Panasonic’s DMP-UB900 is a worthy poster boy. Coupled to an HDR display, its imagery is often astonishing. It’s also a great regular Blu-ray player, and a surprisingly fine CD spinner.
Factor in solid file playback support, plus 4K iterations of Netflix and Amazon Instant Video, and you have a machine that’ll make your new 4K HDR TV look sensational.
Source: techradar.com
I feel some clarification is in order. Blu-ray players will continue to bitstream Dolby Atmos and DTS: X soundtracks (7.1 TrueHD and Master Audio backwards compatible) to receivers and pre-amp/processors with built-in renderers. There is no need for them to have "support" for Dolby Atmos and DTS: X.
Since these scalable immersive formats can effectively handle 32 or more rendered speaker outputs (depending on the compatible A/V equipment you buy), it is far too complex and expensive a task for the player to have built-in immersive renderers and a bunch of Digital-to-Analog Converters… making the unit a pre-amp/processor and not just a player. Besides, there are no products available that accept higher than 7.1 PCM audio streams if the player were to decode these formats internally and send the audio out through HDMI.
What about potential mandatory online authentication of UHD discs as mentioned in the Sony leaks? Hopefully, that will not happen and there has already been backlash when Sony and Microsoft tried this on their gaming consoles, but many A/V enthusiasts would like confirmation. Please start asking about this very important issue.
At CES I saw the back of the player and took a picture, the player seems to have the multi-channel analogue connections, in addition to the typical HDMI, for which DACs are needed "in the player".
Having both types of connections player owners will then have the choice to connect to the pre/pro or A/V Receiver with an analogue or digital connection, the one that provides the better sonic quality, depending on the quality of the DACs of both units.
Also, mentioning the 192 KHz/32 bit DACs in the player is kind of a misnomer. Most customers hooking up an UltraHD Blu-ray player most likely won't be using the analog outs from their player, but will use HDMI 2.0 – so the DACs in the player will have literally nothing to do with the final audio rendering, as that will be done in their receiver. Clearly the article writer has more than a little confusion about how modern digital audio rendering paths work.